Two Wheel Fix
Page 5 of 5 « First 34 5
Show 100 post(s) from this thread on one page

Two Wheel Fix (http://www.twowheelfix.com/index.php)
-   Street (http://www.twowheelfix.com/forumdisplay.php?f=9)
-   -   Opinions on this RC-51? (http://www.twowheelfix.com/showthread.php?t=16528)

101lifts2 09-28-2010 02:37 PM
Quote:
Originally Posted by drewpy (Post 412336)
the rc needs two things right off of the bat, a vacuum tube that deactivates the flapper valve and the soft rev removal kit, once those two things are done the bike is great, but the addition of a PC helps smooth the hiccups
And regearing -1+2

Homeslice 09-28-2010 03:14 PM
Dropping a tooth in front sucks, because I've found that it increases noise & chain wear. I don't see why people don't go +3 or +4 in the rear, instead of doing the same old -1/+2

goof2 09-28-2010 03:48 PM
Quote:
Originally Posted by Homeslice (Post 412440)
Dropping a tooth in front sucks, because I've found that it increases noise & chain wear. I don't see why people don't go +3 or +4 in the rear, instead of doing the same old -1/+2
I believe most bikes require a longer chain once the rear sprocket gets too big. They can use the same chain and still be around the middle of their adjustment range using the -1/+2 method.

Homeslice 09-28-2010 04:19 PM
True, but chains are cheap, and it's a perfect opportunity to go 520 too.

101lifts2 09-29-2010 12:04 AM
Quote:
Originally Posted by Homeslice (Post 412440)
Dropping a tooth in front sucks, because I've found that it increases noise & chain wear. I don't see why people don't go +3 or +4 in the rear, instead of doing the same old -1/+2
Well then fuck why not just go +30 in the back...:kawi:

Particle Man 09-29-2010 09:00 PM
Quote:
Originally Posted by 101lifts2 (Post 412426)
And regearing -1+2
I thought it had plenty of pull AND top end as-is...

dReWpY 09-29-2010 09:20 PM
the gearing was way to tall in first gear imho


All times are GMT -4. The time now is 07:38 AM.
Page 5 of 5 « First 34 5
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.