Suspension ??

Yamerhaw · 03-23-2009, 01:17 PM

noticed on this bike that i have no chicken strips on a 190 rear, but like half an inch on the front, so i assume that i need to raise the forks a little in the front, BUT does it really matter that i'm not using all the front tire, it doesnt turn in very quick, but i like the way it handles,

also does anybody know how i should set up the front suspension for my weight? its set at stock now, but i weight 215 or so, everybody that i know says i need to stiffen it WAY up?

gonna put a zip tie around the front forks and see if i'm bottoming out the front forks, any other suggestions? oh and if i am bottoming them out, what do i need to adjust?

Trip · 03-23-2009, 01:18 PM

Take it to wheelers, he will set it up completely for like $25

Yamerhaw · 03-23-2009, 01:20 PM

Quote:

Originally Posted by Trip

Take it to wheelers, he will set it up completely for like $25

where's that

Trip · 03-23-2009, 01:21 PM

Quote:

Originally Posted by Yamerhaw

where's that

near robbinsville close to the gap. If you are at the gap, head down 129 and it's on the right, right before you get to robbinsville. It's a blue garage. Ken Wheeler is pretty freakin cool dude too.

Amber Lamps · 03-23-2009, 03:18 PM

Quote:

Originally Posted by Trip

near robbinsville close to the gap. If you are at the gap, head down 129 and it's on the right, right before you get to robbinsville. It's a blue garage. Ken Wheeler is pretty freakin cool dude too.

Hey Trip,when we go to the Gap,I'd like to stop there to have Wheeler double check my settings. Should I make an appointment and if so,do you have the number handy? It's been YEARS since I've been by there,is it the same guys running it all this time?

Trip · 03-23-2009, 04:13 PM

Quote:

Originally Posted by TIGGER

Hey Trip,when we go to the Gap,I'd like to stop there to have Wheeler double check my settings. Should I make an appointment and if so,do you have the number handy? It's been YEARS since I've been by there,is it the same guys running it all this time?

it's first come first serve

it's one guy, ken wheeler

Rsv1000R · 03-23-2009, 01:39 PM

Quote:

Originally Posted by Yamerhaw

noticed on this bike that i have no chicken strips on a 190 rear, but like half an inch on the front, so i assume that i need to raise the forks a little in the front, BUT does it really matter that i'm not using all the front tire, it doesnt turn in very quick, but i like the way it handles,

also does anybody know how i should set up the front suspension for my weight? its set at stock now, but i weight 215 or so, everybody that i know says i need to stiffen it WAY up?

gonna put a zip tie around the front forks and see if i'm bottoming out the front forks, any other suggestions? oh and if i am bottoming them out, what do i need to adjust?

If you can't make it to wheelers, the first thing is to figure out if your springs are stiff enough. But it depends on your riding style, and the size of bumps in the road. The goal is to use almost all of the travel over the biggest bumps, You don't want to bottom out though. You can increase pre-load on the springs up to the point you can't get it to the unloaded sag spec for the bike. if it still needs more preload, you need a stiffer spring. Once you have a spring setting you use the damper to dampen out the spring. So if you have a stiffer spring, you'll need to up the damping a like amount or there abouts.

smileyman · 03-23-2009, 02:08 PM

Size of your chicken strips has little to do with suspension...More to do with how you ride, body positioning. You can take the strips off completely with a wrong suspension setup.

Find someone who knows what their doing, have them set your sag (springpreload), then the compression damping, then the rebound per your personal feelings/preferences. Then ride. I bet the strips stay the same.

Amber Lamps · 03-23-2009, 03:15 PM

Yea I replaced the springs on my bike because I weigh 245 lbs and the the bike is set-up for a 160 lb rider. The rear is the most important and easiest to do. Race Tech will sell you a new spring for about $100. The forks suck to do if you don't have the right tools/experience. I would get a rear spring for your weight and set the sag and call it good if I were you.

Yamerhaw · 03-23-2009, 04:26 PM

Quote:

Originally Posted by smileyman

Size of your chicken strips has little to do with suspension...More to do with how you ride, body positioning. You can take the strips off completely with a wrong suspension setup.

.

yeah, not saying i have perfect form or anything, but i'll ride with guys draggin knee, hauling ass, etc....we'll be riding the same speed all together and when we pull off, their tires will have no strips on front or rear, and mine will on the front and sometimes just a hair on the rear, but i notice i get my whole body off and most these guys leave their uppper body up on the bike?

03-23-2009, 01:17 PM	#1
Yamerhaw Country Boy Join Date: Nov 2008 Location: Hicktown in NC Moto: 07 R1 Posts: 797	Suspension ?? noticed on this bike that i have no chicken strips on a 190 rear, but like half an inch on the front, so i assume that i need to raise the forks a little in the front, BUT does it really matter that i'm not using all the front tire, it doesnt turn in very quick, but i like the way it handles, also does anybody know how i should set up the front suspension for my weight? its set at stock now, but i weight 215 or so, everybody that i know says i need to stiffen it WAY up? gonna put a zip tie around the front forks and see if i'm bottoming out the front forks, any other suggestions? oh and if i am bottoming them out, what do i need to adjust? __________________ “If trees could scream, would we be so cavalier about cutting them down? We might, if they screamed all the time, for no good reason.” It takes a big man to cry, but it takes a bigger man to laugh at that man.

03-23-2009, 02:08 PM	#8
smileyman White Trash Hero Join Date: Mar 2008 Location: NW Arkansas Moto: Buell 1125R Porco Rosso Edition Posts: 4,895	Size of your chicken strips has little to do with suspension...More to do with how you ride, body positioning. You can take the strips off completely with a wrong suspension setup. Find someone who knows what their doing, have them set your sag (springpreload), then the compression damping, then the rebound per your personal feelings/preferences. Then ride. I bet the strips stay the same. __________________ Arkriders.com To be the best you must first be willing to risk the worst!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

03-23-2009, 03:15 PM	#9
Amber Lamps Moto GP Star Join Date: Mar 2008 Posts: 14,556	Yea I replaced the springs on my bike because I weigh 245 lbs and the the bike is set-up for a 160 lb rider. The rear is the most important and easiest to do. Race Tech will sell you a new spring for about $100. The forks suck to do if you don't have the right tools/experience. I would get a rear spring for your weight and set the sag and call it good if I were you.