Go Back   Two Wheel Fix > Around the World > International Riders

Reply
 
Thread Tools Display Modes
Old 08-30-2009, 06:13 AM   #1
MikeSP1
Perpetual trouble
 
MikeSP1's Avatar
 
Join Date: Jun 2008
Location: at the base of the Alps
Moto: VTX 1300C, RC51, CBR600RR, CBR929RR
Posts: 715
Default It lives again

So I've been stationed in Japan for about a year and still haven't managed to get my RC registered. Granted I was gone all summer and working my ass of over the winter but that's beside the point. The bike's been sitting on front and rear stands for about a year, most of that time it didn't even have front forks or brakes installed. Well I've been reassembling her over the past few days seeing as how I don't have to go to work. Well today I put the battery back on the charger and while the charger was doing it's thing I pulled the spark plugs out (they look great btw) and squirted some oil into the cylinders. Turned the ignition on and all the lights came on, left the kill switch in kill and hit the starter to get the bike to roll the crank and get some oil moving. Put the spark plugs back in, lowered the fuel tank, dumped in 5 liters of 100 octane. Disconnected the charger, flicked the kill switch to run and hit the starter. Within 4 seconds she was idling on her own, blowing oil smoke like you wouldn't believe (remember I squirted oil into the cylinders). After a few minutes she quit blowing smoke and was running just as pleased as ever. I'm amazed that she started so easily after so long. I'm just one step closer to getting her registered. Now I'm waiting for light bulbs and my vacuum bleeder (still) and I need to call Honda to try and get some paperwork for her and then I'll be set.


BTW, does anyone here work for Honda and could possibly help me out getting some paperwork?
__________________
"Life is not a journey to the grave with the intention of arriving safely in one pretty and well preserved piece, but to skid across the line broadside, thoroughly used up, worn out, leaking oil, shouting GERONIMO!"
MikeSP1 is offline   Reply With Quote
Old 08-30-2009, 01:51 PM   #2
dReWpY
RIP REX
 
dReWpY's Avatar
 
Join Date: Feb 2008
Location: Murfreesboro, TN
Moto: 2008 1125R
Posts: 7,467
Default

what kinda paper work do you need? i used to work for a honda deal and still have some connections to the shop
__________________

Venom R1-016 Squadron
Quote:
Originally Posted by Trip View Post
Moral of this story is everyone is fucked up no matter atheist or religious.
dReWpY is offline   Reply With Quote
Old 08-30-2009, 10:56 PM   #3
MikeSP1
Perpetual trouble
 
MikeSP1's Avatar
 
Join Date: Jun 2008
Location: at the base of the Alps
Moto: VTX 1300C, RC51, CBR600RR, CBR929RR
Posts: 715
Default

I need a Certificate of Origin and a Brake Certificate.
Certificate of Origin is something that says Honda did make my bike's Vin#.
Brake Certificate says that when my bike was built, it conformed to Japan's brake regulations.
__________________
"Life is not a journey to the grave with the intention of arriving safely in one pretty and well preserved piece, but to skid across the line broadside, thoroughly used up, worn out, leaking oil, shouting GERONIMO!"
MikeSP1 is offline   Reply With Quote
Old 09-02-2009, 04:43 PM   #4
the chi
Forum Coach
 
the chi's Avatar
 
Join Date: Feb 2008
Location: GA
Moto: 2006 GSXR 600
Posts: 7,419
Default

Thats awesome man, glad to hear it! You certainly didnt waste any time when you got home did ya?
__________________
Quote:
Originally Posted by Cutty72 View Post
The Chi hath spoken...
and let it be known that what The Chi hath spoketh, will henceforth be done.
the chi is offline   Reply With Quote
Old 09-02-2009, 08:19 PM   #5
MikeSP1
Perpetual trouble
 
MikeSP1's Avatar
 
Join Date: Jun 2008
Location: at the base of the Alps
Moto: VTX 1300C, RC51, CBR600RR, CBR929RR
Posts: 715
Default

Quote:
Originally Posted by The Chi View Post
Thats awesome man, glad to hear it! You certainly didnt waste any time when you got home did ya?
I've got two weeks off from work and a lot of stuff to take care of before I go back to work. I'm still working on the first of business, getting the bike re-assembled. My second order of business is to get the truck squared away. Third order of business is to grow a scruffy beard in two weeks because I can. All three are coming along quite nicely
__________________
"Life is not a journey to the grave with the intention of arriving safely in one pretty and well preserved piece, but to skid across the line broadside, thoroughly used up, worn out, leaking oil, shouting GERONIMO!"
MikeSP1 is offline   Reply With Quote
Old 03-14-2014, 05:47 AM   #6
MikeSP1
Perpetual trouble
 
MikeSP1's Avatar
 
Join Date: Jun 2008
Location: at the base of the Alps
Moto: VTX 1300C, RC51, CBR600RR, CBR929RR
Posts: 715
Default

Not to resurrect a LONG dead thread, but I'm going to.

Because I can.

I have the RC51 ready for inspection, paperwork's all done. Waiting on the weather to play nice long enough for me to get the bike into the trailer and get it to the next town over for inspection. After more road blocks and hurdles than I can enumerate, I FINALLY figured out how to register a machine in Japan. That's when the base decides to do what this base seems to be good at and stick it to people sideways, sans lube. AFI 91-207 was re-written not too long ago, and it requires sport bike riders to attend a MSF course in addition to that required of every other type of bike. All of the sport bike riders at Misawa are being threatened to park their bikes because the base wants a sport bike rider to teach the MSRC (even though there are other courses allowed by the reg.).

Sounds fishy to me, but I've been told to "shut up and color" every time I've inquired about a RiderCoach cert. Here's a few questions for the certified RiderCoaches on here:

1. Is there a different "cert" for each course? Or is a RiderCoach certified to teach all MSF courses?

2. How much ass-pain might I expect if I looked into getting cert'd on my own dime?

3. Is anyone near the Florida panhandle teaching the MSF ARC in June-ish?
__________________
"Life is not a journey to the grave with the intention of arriving safely in one pretty and well preserved piece, but to skid across the line broadside, thoroughly used up, worn out, leaking oil, shouting GERONIMO!"
MikeSP1 is offline   Reply With Quote
Old 03-22-2014, 09:38 AM   #7
racedoll
AMA Supersport
 
Join Date: Nov 2008
Moto: '04 Kawasaki ZX6RR
Posts: 3,392
Default

Congrats on getting the bike alive again. Good luck on the other stuff. I'll have to go to that course too
racedoll is offline   Reply With Quote
Old 03-23-2014, 12:01 AM   #8
No Worries
Keyboard Racer
 
No Worries's Avatar
 
Join Date: Feb 2008
Location: Mile High City
Moto: Old Superbikes
Posts: 1,016
Default

Quote:
Originally Posted by MikeSP1 View Post
3. Is anyone near the Florida panhandle teaching the MSF ARC in June-ish?
I took Lee Parks' Total Control Advanced Rider Clinic several years ago. Terrific class and instructors. But I don't see it scheduled in FL: http://totalcontroltraining.net/HTML/Schedule.html
No Worries is offline   Reply With Quote
Old 03-23-2014, 05:29 AM   #9
MikeSP1
Perpetual trouble
 
MikeSP1's Avatar
 
Join Date: Jun 2008
Location: at the base of the Alps
Moto: VTX 1300C, RC51, CBR600RR, CBR929RR
Posts: 715
Default

Well, here's an update on the bike's registration…done. Trailered the bike to Hachinohe last Wednesday. I pulled into LTO (Land Transportation Office) at 2pm and had a Japanese title and license plate by 430pm.

We're supposed to have a meeting sometime this next week to figure out how we're going to proceed. I have no idea what base leadership is going to decide. Hopefully they don't decide that I need to park 'em. I will definitely look into the total control course.
__________________
"Life is not a journey to the grave with the intention of arriving safely in one pretty and well preserved piece, but to skid across the line broadside, thoroughly used up, worn out, leaking oil, shouting GERONIMO!"
MikeSP1 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:24 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.