Go Back   Two Wheel Fix > In the Garage or Shop > Manufacturer War

Reply
 
Thread Tools Display Modes
Old 02-12-2011, 10:07 AM   #21
Amber Lamps
Moto GP Star
 
Join Date: Mar 2008
Posts: 14,556
Default Question for the engineers on here,

Isn't there a reason that you want the rotating mass to go the same way as the wheels?

Ie; = - = not = | = I know that Moto Guzzi runs theirs that way but don't they have to add counter-rotating mass to make it work? Won't this cause handling issues on a "sport" tourer?
Amber Lamps is offline   Reply With Quote
Old 02-12-2011, 10:08 AM   #22
Amber Lamps
Moto GP Star
 
Join Date: Mar 2008
Posts: 14,556
Default

Quote:
Originally Posted by nhgunnut View Post
I don't own one anymore and Don't mean to quibble but the Victory Drive train is hardly a HD Clone.
Overhead Cams,, gear driven primary and cassette tranny. Make it Very Different than any of the V twin Pushrod bikes, better to compair it tot he Metric Cruisers.
That said I would love to see Motus put out a bike. Test Dynos are notoriously optimistic. Even so a Production V 4 with even 100 ft Lbs of torgue could make a Fun Power Cruiser.
Sure, but they want to make "sport" bikes....
Amber Lamps is offline   Reply With Quote
Old 02-12-2011, 10:59 AM   #23
goof2
AMA Supersport
 
goof2's Avatar
 
Join Date: Feb 2009
Posts: 4,756
Default

Quote:
Originally Posted by Gas Man View Post
It will be a great engine because what most of these guys here aren't understanding is the low end torque that you get from a push rod motor.

Either way I hope they pull it off and make it happen... WOW would it be amazing!
An engine's valvetrain does effect low end torque through their size and timing, but their method of actuation is irrelevant. Pushrod engines are typically designed to produce low end torque only because a normal pushrod engine's valvetrain cannot hold up to high RPM. An overhead cam engine could easily be designed to make that same low end torque, but without the RPM restrictions there isn't any reason to do so. A Hayabusa engine generates almost as much torque as this engine and makes significantly more horsepower with less displacement. The new ZX-10R engine also generates almost as much torque and more horsepower with even less displacement than the Hayabusa. Motus is leaving power on the table by going the pushrod route.

Quote:
Originally Posted by Dave View Post
motocyz anyone? wanna bet it becomes electric prior to release?
That seems to be the trend. Whichever magazine had the all electric issue recently was littered with companies following that business plan.

1) Develop a gasoline powered motorcycle.
2) Try to take deposits on it.
3) Realize deposits aren't rolling in for a Desmosedici priced piece of vaporware no one has heard of.
4) Make a shitty electric version.
5) ???????????????
6) Profit!
goof2 is offline   Reply With Quote
Old 02-12-2011, 11:08 AM   #24
goof2
AMA Supersport
 
goof2's Avatar
 
Join Date: Feb 2009
Posts: 4,756
Default

Quote:
Originally Posted by Amber Lamps View Post
Isn't there a reason that you want the rotating mass to go the same way as the wheels?

Ie; = - = not = | = I know that Moto Guzzi runs theirs that way but don't they have to add counter-rotating mass to make it work? Won't this cause handling issues on a "sport" tourer?
The engine will try to twist the bike over to the side when the crankshaft is accelerating. I've heard Guzzis aren't great about it, but at the same time I haven't heard many complaints about BMW's boxer engined bikes which should do the same thing.
goof2 is offline   Reply With Quote
Old 02-12-2011, 11:21 AM   #25
Amber Lamps
Moto GP Star
 
Join Date: Mar 2008
Posts: 14,556
Default

Quote:
Originally Posted by goof2 View Post
The engine will try to twist the bike over to the side when the crankshaft is accelerating. I've heard Guzzis aren't great about it, but at the same time I haven't heard many complaints about BMW's boxer engined bikes which should do the same thing.
Is it because the boxer engine is "flat", directly opposing?...or do they have "counter-rotating shafts" to balance this out? Oh and that was my point basically, I'm am NOT an engineer by any means but I can see the engine in my Mustang jump to one side when it is revved up, no thanks to that on a bike, especially if the engine is going to be a stressed member of the chassis/suspension. Again. not an engineer but do I have it wrong somehow?
Amber Lamps is offline   Reply With Quote
Old 02-12-2011, 12:59 PM   #26
JoshuaTree
DILLIGAF?
 
JoshuaTree's Avatar
 
Join Date: Nov 2008
Location: Austin, Texas, USA, Earth, Sol, Western Spiral Arm, Milky Way
Moto: 1993 K75SA
Posts: 483
Default

I'm their target market. If its what it claims to be, I'd consider it. The F800ST is a little anemic, the VFR has never done anything for me, and the other tourer choices are two wheeled cars. :/

If its a solid bike, WITH ABS, I'll definitely consider it.
(As in what idiots would even contemplate building a "sport tourer" without ABS currently?)
__________________
"Quis custodiet ipsos custodes?"
"Learn to do the counter-intuitive things that may one day save your ass..."
"... Love Much, Laugh Often..." - Amanda Kay Corso (January 18, 1980 - April 15, 2008)
JoshuaTree is offline   Reply With Quote
Old 02-12-2011, 01:03 PM   #27
JoshuaTree
DILLIGAF?
 
JoshuaTree's Avatar
 
Join Date: Nov 2008
Location: Austin, Texas, USA, Earth, Sol, Western Spiral Arm, Milky Way
Moto: 1993 K75SA
Posts: 483
Default

RE: 90 Degree opposition crankshafts...

Yes, they do twist / lift the bike's chassis a bit. It varies by design. Having had both Boxer and K-Brick engined bikes (both having crankshafts rotating perpendicular to the rotation of the wheels), neither design is "startling" in this respect, even with violent applications of clutch & throttle. Yes, its there. Will you notice it after more than 30 minutes riding the bike? No.
__________________
"Quis custodiet ipsos custodes?"
"Learn to do the counter-intuitive things that may one day save your ass..."
"... Love Much, Laugh Often..." - Amanda Kay Corso (January 18, 1980 - April 15, 2008)
JoshuaTree is offline   Reply With Quote
Old 02-12-2011, 01:52 PM   #28
Dave
Chaotic Neutral
 
Dave's Avatar
 
Join Date: Feb 2008
Location: Cherry Hill NJ
Moto: GV1200 Madura, Hawk gt
Posts: 13,992
Default

Quote:
Originally Posted by goof2 View Post
An engine's valvetrain does effect low end torque through their size and timing, but their method of actuation is irrelevant. Pushrod engines are typically designed to produce low end torque only because a normal pushrod engine's valvetrain cannot hold up to high RPM. An overhead cam engine could easily be designed to make that same low end torque, but without the RPM restrictions there isn't any reason to do so. A Hayabusa engine generates almost as much torque as this engine and makes significantly more horsepower with less displacement. The new ZX-10R engine also generates almost as much torque and more horsepower with even less displacement than the Hayabusa. Motus is leaving power on the table by going the pushrod route.



That seems to be the trend. Whichever magazine had the all electric issue recently was littered with companies following that business plan.

1) Develop a gasoline powered motorcycle.
2) Try to take deposits on it.
3) Realize deposits aren't rolling in for a Desmosedici priced piece of vaporware no one has heard of.
4) Make a shitty electric version.
5) ???????????????
6) Profit!
bingo. like i said before it was likely done for cost reasons if not the retarded philosophy that pushrods are 'murican

Quote:
Originally Posted by goof2 View Post
The engine will try to twist the bike over to the side when the crankshaft is accelerating. I've heard Guzzis aren't great about it, but at the same time I haven't heard many complaints about BMW's boxer engined bikes which should do the same thing.
dont forget drivetrain losses. did you see the way the tranny is laid out? theres gonna be a bigass diff in there somewhere chewing up the power.

Quote:
Originally Posted by JoshuaTree View Post
I'm their target market. If its what it claims to be, I'd consider it. The F800ST is a little anemic, the VFR has never done anything for me, and the other tourer choices are two wheeled cars. :/

If its a solid bike, WITH ABS, I'll definitely consider it.
(As in what idiots would even contemplate building a "sport tourer" without ABS currently?)
hey remember me?
__________________
TWF Post whore #6
Dave is offline   Reply With Quote
Old 02-12-2011, 02:45 PM   #29
Kerry_129
Semi-reformed Squid
 
Kerry_129's Avatar
 
Join Date: Nov 2008
Posts: 531
Default

I'd speculate their decision to go with pushrod design was based on 1) cost/complexity of casting/machining, 2) Overall simpler (considering no ohc drive) & more compact motor, especially with the heads hanging out either side of the bike, ala MotoGuzzi. The heads have to be considerably taller with OHC, especially with a relatively small budget which wouldn't allow for repeated prototyping & material minimization. Way easier, esp. in a V-design, to just stick a cam in the valley right over the crank & with a simple chain or gear drive. Works just fine to, as long as you're not trying to spin it way up. Maybe a distant 3) it's 'murican.

The counter-torque is just nature of the beast & a reaction to the inertia of the crank/flywheel spinning-up. I've felt it on a boxer, and though noticable it wasn't a big deal. That's a V4 mounted relatively high vs. the very low-slung BMW design - and did you see the size of the flywheel in the video?! I bet it has a good bit of counter-torque, but that might just add to its character. Wouldn't be a big handling factor so long as you're changing rpm drastically in a curve - also side-ways V design would lessen the gyroscopic resistance to side-to-side transitions too, vs. typical transverse crank mounting.

All technical BS aside - it does look pretty bad-ass, producing their own engine in-house is impressive, and kudos to them for doing *something* to produce a sporting American motorcycle. I hope they do well & we see good things come of their efforts!
Kerry_129 is offline   Reply With Quote
Old 02-12-2011, 06:27 PM   #30
dReWpY
RIP REX
 
dReWpY's Avatar
 
Join Date: Feb 2008
Location: Murfreesboro, TN
Moto: 2008 1125R
Posts: 7,467
Default

Quote:
Originally Posted by JoshuaTree View Post
RE: 90 Degree opposition crankshafts...

Yes, they do twist / lift the bike's chassis a bit. It varies by design. Having had both Boxer and K-Brick engined bikes (both having crankshafts rotating perpendicular to the rotation of the wheels), neither design is "startling" in this respect, even with violent applications of clutch & throttle. Yes, its there. Will you notice it after more than 30 minutes riding the bike? No.
and its not like this bike is being touted as a track weapon where your angled over and at 99% of usable traction is gone already...

i mean we can armchair race a new engine, but if its not ment to be racing arent we just spinning our wheels??? right tig? lol
__________________

Venom R1-016 Squadron
Quote:
Originally Posted by Trip View Post
Moral of this story is everyone is fucked up no matter atheist or religious.
dReWpY is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:27 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.