Go Back   Two Wheel Fix > Riding > Beginner's End

Reply
 
Thread Tools Display Modes
Old 06-10-2008, 01:46 AM   #31
Dnyce
flyin high
 
Dnyce's Avatar
 
Join Date: Mar 2008
Location: cali
Moto: 10speed huffy w/cards in the spokes
Posts: 2,318
Default

Quote:
Originally Posted by DLIT View Post
But my outside foot, during a turn is kind of pushing my knee to the side of the tank so there's a bit of pressure on the tank.
hows this sound?

for your outside foot to push your knee to the side of the tank, it would have to push against something...the peg. by pushing against the peg, you are putting weight on it, and therefore it would seem this is something u are doing and dont realize it.
__________________
"Racing Is Life, Everything Before and After is Just Waiting" Steve McQueen
Dnyce is offline   Reply With Quote
Old 06-10-2008, 10:03 AM   #32
DLIT
Clit Commander
 
DLIT's Avatar
 
Join Date: Feb 2008
Location: Las Vegas
Moto: 2012 Ducati 1199 Panigale S
Posts: 4,189
Default

Quote:
Originally Posted by Dnyce View Post
hows this sound?

for your outside foot to push your knee to the side of the tank, it would have to push against something...the peg. by pushing against the peg, you are putting weight on it, and therefore it would seem this is something u are doing and dont realize it.
That's what I was thinking, but my weight is being countered by the force against my tank, I don't know, fuck it.
__________________
Dress for the crash.
Not the ride.

DLIT is offline   Reply With Quote
Old 06-10-2008, 12:15 PM   #33
Trip
Hold mah beer!
 
Trip's Avatar
 
Join Date: Feb 2008
Location: 80 Miles South of Moto Heaven
Moto: 08 R1200GS
Posts: 23,268
Default

Quote:
Originally Posted by DLIT View Post
That's what I was thinking, but my weight is being countered by the force against my tank, I don't know, fuck it.
the force against your tank should be more of a squeeze in your thigh and so you feet shouldnt be so much a force on it.
__________________
Quote:
Originally Posted by ebbs15 View Post
according to the article tell him to drink ginger tea...
Quote:
Originally Posted by Tigger
Whatever,Stoner is a bitch! O.J. Simpson has TWO fucked knees and a severe hang nail on his left index finger but he still managed to kill two younger adults,sprint 200 feet to his car (wearing very expensive,yet uncomfortable Italian shoes) and make his get a way!!!
Trip is offline   Reply With Quote
Old 06-10-2008, 12:28 PM   #34
pickle.of.doom
el diablo de verde
 
pickle.of.doom's Avatar
 
Join Date: Feb 2008
Location: Howell, MI
Moto: VTR, CBR, DRZSM
Posts: 1,046
Default

__________________

WOS Forums

Last edited by pickle.of.doom; 07-11-2008 at 12:48 PM..
pickle.of.doom is offline   Reply With Quote
Old 06-10-2008, 01:03 PM   #35
the chi
Forum Coach
 
the chi's Avatar
 
Join Date: Feb 2008
Location: GA
Moto: 2006 GSXR 600
Posts: 7,419
Default

can i just state that everyone is going to have a difference of opinion on this one?

For example, those taller will have to adjust their style and cant ride like shorter people, those wider or stockier people cant ride like wiry people. After learning from my friends (retired racers, current racers, and track junkies), all people have a lil different style, you just have to find a proper style that fits your body type and ride.

I cant tell you guys to do it like I do, because I operate on a "tits to the tank" style. Being rather tiny compared to you guys, and not weighing very much, I have to adjust my style to compensate for this, and learning from female racers, I know if I have my chest on the side of my tank, with my arms relaxed, weighting the outside peg, and my knee directly out, ass off the seat and head down towards my mirror, then I am using the optimal position for me, whereas a heavier guy cant necessarily completely hold himself off the seat with knee out and his chest beside (not on or against, i mean BESIDE the tank, with shoulder at the same heigth as the tank) for any length of time. (think spider monkey)

Take the good points you can use, leave the rest and develop your best riding style for you. Good thread Trip!
__________________
Quote:
Originally Posted by Cutty72 View Post
The Chi hath spoken...
and let it be known that what The Chi hath spoketh, will henceforth be done.
the chi is offline   Reply With Quote
Old 06-10-2008, 01:07 PM   #36
DLIT
Clit Commander
 
DLIT's Avatar
 
Join Date: Feb 2008
Location: Las Vegas
Moto: 2012 Ducati 1199 Panigale S
Posts: 4,189
Default

Quote:
Originally Posted by Trip View Post
the force against your tank should be more of a squeeze in your thigh and so you feet shouldnt be so much a force on it.
I think you might be thinking I'm putting more force than I actually am. I use the peg as a point to create leverage against my tank, making my knee against my tank secure as fuck. I could probably let go of the bars, that's how secure I'm talking about.
__________________
Dress for the crash.
Not the ride.

DLIT is offline   Reply With Quote
Old 06-10-2008, 01:17 PM   #37
No Worries
Keyboard Racer
 
No Worries's Avatar
 
Join Date: Feb 2008
Location: Mile High City
Moto: Old Superbikes
Posts: 1,016
Default

Wait a second. When you are riding mountains or canyons, there is no time between curves to rotate hips, weigh your feet, or hug the tank. Here's what Lee Parks recommends in Total Control:

1. Your foot should be tucked in so it doesn't stick out.
2. Start leaning your upper body to keep the centerline of your upper body to the inside of your bike's centerline.
3. Push on the outside grip to keep the bike going straight.
4. Locate the turn point.
5. After locating your turn point, look through the turn.
6. Now you start turning by relaxing the outside grip.
7. Push on the inside grip until your desired lean angle is achieved. Use only the inside arm to make all steering corrections.
8. Roll on the throttle smoothly.
9. Push on the outside grip to bring the bike upright.
10. Move back to neutral.

I don't do any knee movement, or foot movement, or move my butt around. I just move my upper body from one side to the other, and rotate my head to look through the turn. The upper body movement is enough to move the bike's center of gravity to the inside of the turn. With my upper body toward the inside, it's real easy to push on the inside grip. There is just no time to think about the other things, let alone do them, in the short amount of time that curves change direction in a canyon.
No Worries is offline   Reply With Quote
Old 06-10-2008, 01:19 PM   #38
the chi
Forum Coach
 
the chi's Avatar
 
Join Date: Feb 2008
Location: GA
Moto: 2006 GSXR 600
Posts: 7,419
Default

I find that weighting my outside peg gives me that lil bit of "oomph" that will allow me with my momentum to slide to the outside while still accelerating forward...hard to explain but its an incredible feeling, and from something so small!

I place my foot to the outside edge of the peg with foot still on it completely and push down, while gripping with my thigh and leg to the tank and it actually anchors my leg more firmly on the tank, but thats due to the way the gsxr tank is shaped as well.

Im talking straight track riding however, including my post above...street riding i dont make nearly as complex...more of a roll...from side to side like what NW mentions...
__________________
Quote:
Originally Posted by Cutty72 View Post
The Chi hath spoken...
and let it be known that what The Chi hath spoketh, will henceforth be done.

Last edited by the chi; 06-10-2008 at 01:22 PM..
the chi is offline   Reply With Quote
Old 06-10-2008, 01:24 PM   #39
zortness
Contagious Track Addict
 
zortness's Avatar
 
Join Date: Feb 2008
Location: Vegas
Moto: Too many bikes
Posts: 131
Default

Well, here's my contribution to the topic...

Leaning off the bike is a function of velocity and momentum. You're trying to move the center of gravity of the bike/rider combination so that you can keep the bike more upright and carry more speed (the moment of velocity change of the bike). The more upright the bike is in a corner, the more tire is touching the ground and the faster you can go without losing grip. The following information dump includes the things I go over in my head every time I ride my bike.


- Hold all of your weight with your legs. In any given corner, I'm holding on completely with my outside leg. Your arms need to be as loose as possible to get as much feedback from the front wheel as possible. If that thing starts to move around, you want to know, but you'll never feel it if you're tensing up your arms. This is hugely important (and extremely difficult to do) while under intense braking and trail braking up to the apex, which is when you need the most front end feedback from your front tire.

- Your lower body does not have to move very far. Some people exaggerate the movement to try and compensate for poor upper body position and it completely throws the balance of the bike off. Pridmore says rotate around the tank (imagine you had a string going from your suit to your gas cap) only about 3 - 4 inches. This can change depending on the turn and ground clearance, but that's a good baseline. I find this puts about half of my ass off the seat, sometimes more. It also keeps your inside knee tucked in closer to your fairings, so you get a more accurate feel of how far the bike is actually leaned over.

- The real weight distribution when leaned over comes from moving your upper body. Look through the corner with your head and your shoulders (which, as an added bonus, makes the track seem much larger and slower). Get your head down low when exiting and get the bike upright as soon as possible.

- Always keep the balls of your feet on your pegs (unless you're shifting of course). Dig into the pegs with the balls of your feet and dig your heels into the heel guards. Pridmore mentions that he has to replace heel guards often because he continually bends them. This gives you a better feel for what the rear tire is doing, which is important when exiting the corner.

- Get the bike pointed in the correct direction and get it stood up as quickly as possible when exiting a corner. This is the point where your head should be the lowest and you should really be exaggerating hanging off of the bike. Push the bike away from you to get it stood up. I'm not exactly sure where my weight goes at this point, but it feels natural to me. I'm probably pushing on my outside leg (ie: the peg) to lift the bike up, maybe a little movement with the arms as well.

- Less is more. Don't move around on the bike when you don't have to. If there are two right hand corners in a row, even with a straight in between, don't move your lower body all the way back onto the bike, keep it off to the side. The more you move your body, the more the bike's geometry changes.

- Set up early for corners. A fast corner entry does not mean waiting until the last possible second to move your body, hit the brakes, and downshift. Your body position should be set up first. Your downshifts should be quick and smooth and over with before you start your turn-in. Extending your braking zones and using lighter braking can improve your corner speed because your bike will feel more stable. Smooth is fast. As you get smoother and quicker, these actions will start to blend together, but the smoothness will remain. If you watch the fast guys at your local track (I mean the really fast guys, like AMA level), they will often initiate their turning procedures long before you would think.

- Keeping with the smoothness theme, practice letting the clutch out smoothly as you downshift. If you watch Rossi, his clutch is not fully engaged until he hits the apex of a corner. If you're smooth enough on the clutch, there is no reason to blip the throttle on your bike while downshifting. Use the clutch to modulate the RPM's of your bike while engine braking.

- This may seem like common sense, but most people are not patient enough while exiting the corners. If you get on the gas too soon, you can't get to full throttle as quickly because it will push you wide. Patience is the key here. A wider turn-in also helps for most corners where the drive out is important.

- You should only be near full lean in a corner for a short instant, right when you hit your line's apex (not necessarily the physical apex of the corner). Before you hit that point, ideally you want to be trail braking very very slightly and leaning in. As soon as you hit that point, you want to be pushing the bike up and rolling on the throttle. This is the "ideal situation" and will probably never be reached by mere mortals like ourselves, but it gives us something to reach for.

- Know what type of corner you're going through. There are fast corners, entry corners, exit corners, and slow corners. Slow corners are just that... slow. Patience will pay off big time if you just get through the slow corners and set up for the important ones. Turn 3 at LVMS is a slow corner. Fast corners are where you make up the most time, like turn 2, 3, and 4, at Miller or turn 5 at LVMS, these are usually "sweepers". Entry corners have a quick entry, but the exit does not matter, so your entry line can be very tight, these are good corners to pass on the brakes. Turn 3 at SMMR is a good example of an entry corner. Exit corners are the most important, where you exit the corner onto a very quick section of track and drive is extremely important. Turn 4 at LVMS comes to mind, which is a slow, late apex, right hander onto the back straight. Turn 10 at SMMR is another example of an exit corner.

- Pick the important corners and sacrifice the unimportant ones. If you look at SMMR, turn 8 by itself looks like a fast sweeper, but if you look at the track map, you can see that 9 and 10 are very tight afterward. Looking at the series of turns, you can figure out that 10 is an exit corner, and probably the most important one. So to get the most out of this section, you use turn 8 as an entry corner, sacrificing the exit to get a very wide entry into 9. Turn 9 is completely sacrificed to square off turn 10 and get the best drive out of 10.


Hopefully that helps. The corner information might not seem relevant to how to lean off the bike... but each type of corner requires different body movements. Everything is connected in some way on the bike. You guys should be able to look at the track maps for those examples and get an idea of what I'm talking about regarding each corner.

[added]
If you sit on your bike and get in an aggressive riding position, take your hands off of the bars. Those muscles in your back and your stomach that you feel tensing up... those are the ones you use for your upper body. Now, hold that position and lift your ass about 1/4th an inch off the seat. Your legs will probably start hurting right away. Go ride your bicycle and work out those muscles. I stretch before and after every session on the bike, it helps tremendously with fatigue.

Last edited by zortness; 06-10-2008 at 01:30 PM..
zortness is offline   Reply With Quote
Old 06-10-2008, 03:10 PM   #40
Trip
Hold mah beer!
 
Trip's Avatar
 
Join Date: Feb 2008
Location: 80 Miles South of Moto Heaven
Moto: 08 R1200GS
Posts: 23,268
Default

Quote:
Originally Posted by DLIT View Post
I think you might be thinking I'm putting more force than I actually am. I use the peg as a point to create leverage against my tank, making my knee against my tank secure as fuck. I could probably let go of the bars, that's how secure I'm talking about.
Yeah I know, I can easily let go of my clutch hand in a corner and do whatever the fuck I want with it, such as brush the ground if I want to be gay like that. If I didn't have to steer, I could just raise my hands up rollercoaster stylee through corners. Only time I have weight on my arms is hard downhill sections because they are much tougher and I am still not use to them.

Quote:
Originally Posted by No Worries View Post
Wait a second. When you are riding mountains or canyons, there is no time between curves to rotate hips, weigh your feet, or hug the tank. Here's what Lee Parks recommends in Total Control:

1. Your foot should be tucked in so it doesn't stick out.
2. Start leaning your upper body to keep the centerline of your upper body to the inside of your bike's centerline.
3. Push on the outside grip to keep the bike going straight.
4. Locate the turn point.
5. After locating your turn point, look through the turn.
6. Now you start turning by relaxing the outside grip.
7. Push on the inside grip until your desired lean angle is achieved. Use only the inside arm to make all steering corrections.
8. Roll on the throttle smoothly.
9. Push on the outside grip to bring the bike upright.
10. Move back to neutral.

I don't do any knee movement, or foot movement, or move my butt around. I just move my upper body from one side to the other, and rotate my head to look through the turn. The upper body movement is enough to move the bike's center of gravity to the inside of the turn. With my upper body toward the inside, it's real easy to push on the inside grip. There is just no time to think about the other things, let alone do them, in the short amount of time that curves change direction in a canyon.

There is plenty of time to do all the things you mention as you can't do in the mountains at the gap. Just takes practice.
__________________
Quote:
Originally Posted by ebbs15 View Post
according to the article tell him to drink ginger tea...
Quote:
Originally Posted by Tigger
Whatever,Stoner is a bitch! O.J. Simpson has TWO fucked knees and a severe hang nail on his left index finger but he still managed to kill two younger adults,sprint 200 feet to his car (wearing very expensive,yet uncomfortable Italian shoes) and make his get a way!!!
Trip is offline   Reply With Quote
Reply

Bookmarks

Tags
everyone is expert


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:12 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.