929 axle nut torque??

ZUKIMON · 05-12-2009, 08:49 PM

I'm getting ready to pull the front and rear wheels off the bike and I need to know what to torque them back down to. Anybody have this info?? I had the service manual but I just got a new computer and it's not on here. I'm having hard drive problems with my old one so I don't know if I can get it to work right. I cannot remember where I downloaded it either.

Someone help me as I would really like to get these tires on this evening and I don't want to screw it up.

Cutty72 · 05-12-2009, 10:02 PM

German torque spec. Geutentite.

ok, maybe wait for someone that knows.

And here is a good reason to have a hard copy of your service manual.

fasternyou929 · 05-12-2009, 10:50 PM

83 ft. lbs.

fasternyou929 · 05-12-2009, 10:54 PM

And front...

Gas Man · 05-12-2009, 11:46 PM

Quote:

Originally Posted by Cutty72

German torque spec. Geutentite.

ok, maybe wait for someone that knows.

And here is a good reason to have a hard copy of your service manual.

That's my meathod if you don't know.

ZUKIMON · 05-13-2009, 01:58 AM

Quote:

Originally Posted by Cutty72

German torque spec. Geutentite.

ok, maybe wait for someone that knows.

And here is a good reason to have a hard copy of your service manual.

I thought that was the German female nurse!!

Thanks fasternyou, you have no idea how much I appreciate that and am scared by it at the same time. I'll put it this way......the rear nut couldn't have been more than 20 ft. lbs. tight.

Some dumb fucker had to not known what he was doing to leave it that loose when they did the rear tire. I'm just glad that it didn't decide to let loose on that last 140 mph run I made!

I'm taking my wheels to work with me tomorrow and I'll bring home the torque wrench. They will be done right this time around.

fasternyou929 · 05-13-2009, 04:06 PM

No worries man! 20 ft. lb. is plenty of torque for, say, a bar end screw. But an axle nut?

z06boy · 05-13-2009, 05:02 PM

I need to get a torque wrench. I changed the rear tire of the R6 this past weekend and tightened it snug...real snug but didn't put a torque wrench on it.

ZUKIMON · 05-13-2009, 07:52 PM

Just got home and put everything back together. I'm very thankful that you posted all that up as I needed 4 different values from those tables.

Now, it's off to ride her with new rubbers!!

askmrjesus · 05-15-2009, 09:15 PM

Quote:

Originally Posted by fasternyou929

No worries man! 20 ft. lb. is plenty of torque for, say, a bar end screw. But an axle nut?

Going the opposite direction is almost as bad.

Had a guy come in to my shop for a tire change on a 750 monster. Put my air gun on it (300 ft. pound rating), and it wouldn't budge. Sprayed some PB Blaster on it (good shit BTW), tried again, tried rocking it back and forth, nothing. Fucking thing was welded on. It took my biggest breaker bar, two guys, and a six foot piece of pipe to break the bastard loose.

The axle was toast, had to get a new one. Torque spec on the thing was like 67 lbs.

"My buddy helped me adjust the chain."

"Your buddy's a fucking moron."

JC

05-12-2009, 08:49 PM	#1
ZUKIMON Is this thing on? Join Date: Feb 2009 Location: Ashe Co, NC (Near Boone) Moto: '01, 929RR Posts: 398	929 axle nut torque?? I'm getting ready to pull the front and rear wheels off the bike and I need to know what to torque them back down to. Anybody have this info?? I had the service manual but I just got a new computer and it's not on here. I'm having hard drive problems with my old one so I don't know if I can get it to work right. I cannot remember where I downloaded it either. Someone help me as I would really like to get these tires on this evening and I don't want to screw it up. __________________ Dirty Harry said there's nothing wrong with a little shooting, as long as the right people get shot.

05-13-2009, 07:52 PM	#9
ZUKIMON Is this thing on? Join Date: Feb 2009 Location: Ashe Co, NC (Near Boone) Moto: '01, 929RR Posts: 398	Just got home and put everything back together. I'm very thankful that you posted all that up as I needed 4 different values from those tables. Now, it's off to ride her with new rubbers!! __________________ Dirty Harry said there's nothing wrong with a little shooting, as long as the right people get shot.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

05-12-2009, 10:50 PM	#3
fasternyou929 SFL Expatriate #2 Join Date: Nov 2008 Location: Raleigh, NC Moto: CBR1000 Posts: 2,043	83 ft. lbs.

05-13-2009, 04:06 PM	#7
fasternyou929 SFL Expatriate #2 Join Date: Nov 2008 Location: Raleigh, NC Moto: CBR1000 Posts: 2,043	No worries man! 20 ft. lb. is plenty of torque for, say, a bar end screw. But an axle nut?

05-13-2009, 05:02 PM	#8
z06boy Letzroll Join Date: Feb 2008 Location: Lake Norman area, NC Moto: 07 Red R1 & 07 Blue R6 Posts: 5,265	I need to get a torque wrench. I changed the rear tire of the R6 this past weekend and tightened it snug...real snug but didn't put a torque wrench on it.