Suffering fuel economy?

[Triple]

...

[Amber Lamps]

Originally Posted by Triple

Ideas or suggestions?

http://www.sv-portal.com/forums/show...post1851871352

First, I'd doing some research and find out if there is a thickness or size difference between the rotors and I would check to see if there is a difference in overall "width" between the inner/outer edges of the rotors on the wheel. Sometimes you have to shim different parts to make these kinds of swaps work. You may have to shim the rotors out so they don't ride on the inside pads of the caliper. If the rotors are larger in diameter, you may have to shim the caliper "out" to compensate.

[askmrjesus]

Originally Posted by TIGGER

First, I'd doing some research and find out if there is a thickness or size difference between the rotors and I would check to see if there is a difference in overall "width" between the inner/outer edges of the rotors on the wheel. Sometimes you have to shim different parts to make these kinds of swaps work. You may have to shim the rotors out so they don't ride on the inside pads of the caliper. If the rotors are larger in diameter, you may have to shim the caliper "out" to compensate.

Ideally, this should have been done before you tried to set your rotors on fire.

JC

[Amber Lamps]

Originally Posted by askmrjesus

Ideally, this should have been done before you tried to set your rotors on fire.

JC

You could always just get a GSXR front wheel...

[askmrjesus]

Originally Posted by TIGGER

You could always just get a GSXR front wheel...

And GSXR calipers...

(And GSXR master cylinder, motor, seat, fairing, frame and, well, a GSXR)


JC

[Amber Lamps]

Originally Posted by askmrjesus

And GSXR calipers...

JC

Shit I figured that he had GSXR calipers since I don't know if SV calipers would fit on GSXR forks... I guess they might....

[Amber Lamps]

Originally Posted by askmrjesus

And GSXR calipers...

(And GSXR master cylinder, motor, seat, fairing, frame and, well, a GSXR)


JC

I wonder if someone could just figure out a way to spoon a SV1000 motor into a GSXR chassis.... That might make for a cool bike.

Originally Posted by askmrjesus

I don't know either, and I'm not looking it up.

JC

Me either I'm wayyyyy to lazy and medicated for that shit!!!!