HUGE part I'm working on ( plenty of OT )

'73 H1 Triple · 08-23-2009, 12:36 AM

I put in 60 hours this week welding on this extremely large stainless steel weldment. Plenty of TIG welding and also some MIG welding too.

This is half of the main body. It's 30' long, about 7' deep and just over 8' high.

Out of focus picture of the inside.

The fan is set at 7' tall and that's a 6' step ladder in the back. The two augers pictures later will go in each half of this main body.

The auger body, three augers with the drive system will weigh over 20,000 lbs fully assembled.

This will hold three large augers to remove the processed material from the tank.

Where the product comes out of the auger. It's 25" wide and 100" long.

This will bolt up to one end of the auger and along with a heavy steel motor mount ( made of four I beams with 1/2" plate on the top), hold the three motors with speed reducers that will drive the augers.

Those stainless steel augers are 36' long and weigh over 3500 lbs each.

Jeff
previously a machinist, now a welder again for another month or so

BobTheBiker · 08-23-2009, 12:51 AM

Interesting. what shall this be for when its done?

derf · 08-23-2009, 12:54 AM

Quote:

Originally Posted by BobTheBiker

Interesting. what shall this be for when its done?

Umm, looks to be some sort of drill maybe?

Actually I was wondering what the first few pics were.

Dave · 08-23-2009, 01:02 AM

Quote:

Originally Posted by BobTheBiker

Interesting. what shall this be for when its done?

really big supercharger

derf · 08-23-2009, 01:06 AM

Quote:

Originally Posted by dave

really big supercharger

hahaha

Dave · 08-23-2009, 01:39 AM

shits gonna wheeeeeeeeee so loud you'll shit your pants

Lamnidae · 08-23-2009, 07:54 AM

nice fabrication there man.

08-23-2009, 12:36 AM	#1
'73 H1 Triple restorer of the original Join Date: Mar 2008 Location: Zionsville,PA Moto: '93 ZR1100 &'73 Kawasaki H1 500 Posts: 1,331	HUGE part I'm working on ( plenty of OT ) I put in 60 hours this week welding on this extremely large stainless steel weldment. Plenty of TIG welding and also some MIG welding too. This is half of the main body. It's 30' long, about 7' deep and just over 8' high. Out of focus picture of the inside. The fan is set at 7' tall and that's a 6' step ladder in the back. The two augers pictures later will go in each half of this main body. The auger body, three augers with the drive system will weigh over 20,000 lbs fully assembled. This will hold three large augers to remove the processed material from the tank. Where the product comes out of the auger. It's 25" wide and 100" long. This will bolt up to one end of the auger and along with a heavy steel motor mount ( made of four I beams with 1/2" plate on the top), hold the three motors with speed reducers that will drive the augers. Those stainless steel augers are 36' long and weigh over 3500 lbs each. Jeff previously a machinist, now a welder again for another month or so

08-23-2009, 01:39 AM	#6
Dave Chaotic Neutral Join Date: Feb 2008 Location: Cherry Hill NJ Moto: GV1200 Madura, Hawk gt Posts: 13,992	shits gonna wheeeeeeeeee so loud you'll shit your pants __________________ TWF Post whore #6

08-23-2009, 12:51 AM	#2
BobTheBiker too much time on my hands Join Date: Jul 2008 Location: the northern district of god damn Moto: 01 ZX6R, looking for more now. Posts: 1,802	Interesting. what shall this be for when its done?