I think I'm going to test out a Buell 1125R - Page 11

Cutty72 · 07-16-2009, 01:58 PM

Quote:

Originally Posted by Tmall

I bought a drummer ss. Everthing just wipes off. And no lower fairing to remove...

Do the XB's have 2 drain plugs and a filter?
With the drummer I don't get oil on the exhaust anymore... but still on the kickstand.

Marko, a funnel contraption might work, but as the holes are on the side rather than the bottom... not sure. Carb cleaner works great to clean it off however.

Tmall · 07-16-2009, 02:06 PM

The primary oil gets on the tip of the muffler. And the filter drips on it as well. But, its a 2 second clean up with a paper towel.

I only have the 2 drain plugs and the filter. The lower fairing has to come off for the filter, but with the new exhaust I leave the lower off. It looks a lot better.

marko138 · 07-16-2009, 03:27 PM

I've got no problem keeping my shit spotless.

marko138 · 07-16-2009, 04:05 PM

Drains on the side of the engine?

smileyman · 07-16-2009, 04:19 PM

the rotax mill has a drain plug on the tank and under the sump along with an atv style oil filter under a cover on the left side. only holds 2.7 qts. I have some B12 chemtool for the mess, and dont think it will be hard on me...nice tip on the wheel though!

Cutty72 · 07-16-2009, 06:42 PM

Quote:

Originally Posted by marko138

Drains on the side of the engine?

Truth. Main plug is on the left side of the engine, right in front of the kickstand. 2nd is on the right side, underneath, in front of brake lever.
Filter is a canister type, again, left side.

marko138 · 07-16-2009, 06:43 PM

Quote:

Originally Posted by Cutty72

Truth. Main plug is on the left side of the engine, right in front of the kickstand. 2nd is on the right side, underneath, in front of brake lever.
Filter is a canister type, again, left side.

No kidding.

Cutty72 · 07-16-2009, 06:43 PM

Quote:

Originally Posted by smileyman

the rotax mill has a drain plug on the tank and under the sump along with an atv style oil filter under a cover on the left side. only holds 2.7 qts. I have some B12 chemtool for the mess, and dont think it will be hard on me...nice tip on the wheel though!

it holds 2.7 quarts WITHOUT changing the filter.
If you change the filter when you change oil (and who doesn't?) just put in 2.9-3 quarts.

I dump in all 3 and have never had it "overfull" doing the proper hot check, cold check or any other type of check.

marko138 · 07-16-2009, 06:45 PM

Do these suckers consume oil like alot of XBs?

Cutty72 · 07-16-2009, 06:49 PM

Quote:

Originally Posted by marko138

Do these suckers consume oil like alot of XBs?

After the first 1000 miles, I have had no oil consumption to speak of.
First 1K I added about 1/4 quart total each oil change. (200 and 800 miles)

07-16-2009, 04:19 PM	#105
smileyman White Trash Hero Join Date: Mar 2008 Location: NW Arkansas Moto: Buell 1125R Porco Rosso Edition Posts: 4,895	the rotax mill has a drain plug on the tank and under the sump along with an atv style oil filter under a cover on the left side. only holds 2.7 qts. I have some B12 chemtool for the mess, and dont think it will be hard on me...nice tip on the wheel though! __________________ Arkriders.com To be the best you must first be willing to risk the worst!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-16-2009, 02:06 PM	#102
Tmall Aspiring Rapper Join Date: Nov 2008 Location: Halifax, NS Moto: '12 CB1000R Posts: 3,569	The primary oil gets on the tip of the muffler. And the filter drips on it as well. But, its a 2 second clean up with a paper towel. I only have the 2 drain plugs and the filter. The lower fairing has to come off for the filter, but with the new exhaust I leave the lower off. It looks a lot better.

07-16-2009, 03:27 PM	#103
marko138 DefenderOfTheBuelliverse Join Date: Feb 2008 Location: Parts Unknown Moto: Buell XB12R Posts: 18,585	I've got no problem keeping my shit spotless.

07-16-2009, 04:05 PM	#104
marko138 DefenderOfTheBuelliverse Join Date: Feb 2008 Location: Parts Unknown Moto: Buell XB12R Posts: 18,585	Drains on the side of the engine?