Go Back   Two Wheel Fix > In the Garage or Shop > Mechanical or Tech

Reply
 
Thread Tools Display Modes
Old 04-23-2012, 01:00 PM   #111
shmike
Follower
 
shmike's Avatar
 
Join Date: Nov 2008
Posts: 5,549
Default

Quote:
Originally Posted by RedRider2k2 View Post
Not on the 11 I've ridden. Sounds rough at Idle. Like my CBR did when it was running on 3. (Minus the hissing from the burned valve of course )
Yeah, it sounds like a p-twin at idle.
__________________
Racing For Smiles
shmike is offline   Reply With Quote
Old 06-15-2012, 08:29 PM   #112
pauldun170
Serious Business
 
pauldun170's Avatar
 
Join Date: Nov 2008
Location: New York
Moto: 1993 ZX-11 2008 CBR1000rr
Posts: 9,723
Default

Major update
Replaced the plugs.
Pulled carbs and kung fu'd the float bowl screws with my brand spanking new impact screwdriver.
Pulled the float bowls, mains, pilots, air mix screw (or as I like to call it...that other thingy)
Guitar wire+carb cleaner +vacation day every hole, nook and cranny.
Air mix screw thingys 2 turns out.
All float bowl screws replaced with 2.5mm hexmobobs and 30 minutes fighting to get the throttle cables back together at the grip and everything is mounted.
Fresh gas into the tank and and into my trusty gasoline jar and I hit the start button.
Once the gas makes it to the fuel pump the bike springs to life.
Choke is only required for a couple of seconds and it reponds nicely to the throttle (at least as well as I ever remember it responding) even when cold.
No more fucking bogging at the slightest throttle inputs when cold.
Bike warms up and I set the idle to 1000rpm. Responds ok. Set it between 1K and 1.5K and it just like old times.

Way too tempting so I took it for a spin around the block (or two).
Holy crap its been awhile
Forgot how much lower the ride height is compared to the CBR. Must have accidentally sprayed some armor all on the seat because I'm sliding all over the damn place. The ride is straight out of a 90's Buick. It soaks up everything. Rocks, animals...houses.
Pulls cleanly from any RPM. No hesitation.
Twist the throttle and speed noise rise smoothly.
Gear box is in fine shape, I hate to say it but its smoother than the CBR.
Clutch feels a bit vague. That probably could use attention but at no point do I detect slippage neither was there an issue with getting going. The engagement point is just weird and the lever itself needs to be adjusted.

Took tried a couple of pulls from various RPM.
7K+ is definite happy zone.

I think I going to consider this done
__________________


Quote:
Originally Posted by Dave View Post
feed your dogs root beer it will make them grow large and then you can ride them and pet the motorcycle while drinking root beer
pauldun170 is offline   Reply With Quote
Old 06-15-2012, 10:14 PM   #113
askmrjesus
Soul Man
 
askmrjesus's Avatar
 
Join Date: Nov 2008
Location: Everywhere, all the time.
Moto: '0000 Custom Turbo Cross (with jet kit).
Posts: 6,481
Default

Two things;

1. Nice job, you done good boy.

2. It's never done unless you sell it.

JC
__________________
The way things are going, they're gonna crucify me.
askmrjesus is offline   Reply With Quote
Old 06-15-2012, 10:33 PM   #114
pauldun170
Serious Business
 
pauldun170's Avatar
 
Join Date: Nov 2008
Location: New York
Moto: 1993 ZX-11 2008 CBR1000rr
Posts: 9,723
Default

Quote:
Originally Posted by askmrjesus View Post
Two things;

1. Nice job, you done good boy.

2. It's never done unless you sell it.

JC
Will be in the for sale section as soon as I get the pics uploaded
__________________


Quote:
Originally Posted by Dave View Post
feed your dogs root beer it will make them grow large and then you can ride them and pet the motorcycle while drinking root beer
pauldun170 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:29 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.