Go Back   Two Wheel Fix > In the Garage or Shop > Mechanical or Tech

Reply
 
Thread Tools Display Modes
Old 11-17-2008, 02:57 AM   #1
fun-times-always
Squid
 
Join Date: Nov 2008
Location: Sierra Vista, AZ
Moto: 2004 R1
Posts: 9
Default please help w/ overheat

first post here, a friend on mustangforums recommended this site to me concerning a problem with my 2004 R1. the bike has 5000 miles on it, mostly stock save for exhaust, intake, and other small stuff. the story is mostly i brought the bike to a self car wash to hose it down. it has ran just fine the entire time i have owned it, but after washing it, it was overheating on the way home bad. i stoped a couple of times just to get it 15 miles. the light comes on, on the dash. is there something i may have hit with that sprayer or pulled a wire off or something of that sort? i am pretty new to the bike world. any help i would appreciate much. thank you much. my intent is maybe its a quick fix insted of paying a dealer lots of money for.
fun-times-always is offline   Reply With Quote
Old 11-17-2008, 03:06 AM   #2
Cutty72
Ride Naked.
 
Cutty72's Avatar
 
Join Date: Feb 2008
Location: Flat and Straight ND
Moto: 08 BUELL 1125R, 05 SV650S
Posts: 7,916
Default

Check make sure all your coolant lines are still connected where they should be, and that there is coolant in the system.
Then check to see if the thermostat wires are all connected.

and FYI, high pressure water and bikes aren't the best combo in the world.
__________________
Adrenaline... the wonder drug.

Quote:
Originally Posted by Gas Man View Post
Again... Cutty you are one smart man!!
Quote:
Originally Posted by The Chi View Post
If I have to get help to get it back up, I dont need to be riding it.

3662 Supply NCO

Cutty72 is offline   Reply With Quote
Old 11-17-2008, 03:09 AM   #3
fun-times-always
Squid
 
Join Date: Nov 2008
Location: Sierra Vista, AZ
Moto: 2004 R1
Posts: 9
Default

i will, thanks for your help on that, and wont make that mistake again
fun-times-always is offline   Reply With Quote
Old 11-17-2008, 03:42 AM   #4
Mr Lefty
TWFix Legend
 
Mr Lefty's Avatar
 
Join Date: Feb 2008
Location: Denver CO
Moto: 01 BMW F650GS Dakar
Posts: 15,677
Default

yeah shit just get a bottle of Meguires quick detail and spray and wipe after every ride and you'll be good. no need to ever wash the bike with water imo unless you get caught in some nasty rain or some how get nailed with mud...


on the main issue... yeah check to see that you didn't somehow dislodge a hose... also check that your fan is working... you may have unplugged the fan if there's a quick disconnect you hit with the high pressure water.

how long ago was this? does the bike overheat when it's idle'n or only at speed? does your fan come on... how is your coolant level?

when you washed did you try to avoid the motor with the pressure washer? or did you intentionally wash the motor? be honest... that pressure is a lot for hoses and wires...

good luck bro.
Mr Lefty is offline   Reply With Quote
Old 11-17-2008, 03:46 AM   #5
fun-times-always
Squid
 
Join Date: Nov 2008
Location: Sierra Vista, AZ
Moto: 2004 R1
Posts: 9
Default

i didnt put any DIRECT pressure on the engine, the sprayer was a fair distance from the engine. the fan works, and it works well. Its louder now than i have ever noticed before, and it will not overheat at idle, i can let it idle for a long time, nothing, but at any speed at rpm greater than say, 3k it will start and i smell a burning smell. i hope this info helps a little bit too. thanks again
fun-times-always is offline   Reply With Quote
Old 11-17-2008, 03:57 AM   #6
Mr Lefty
TWFix Legend
 
Mr Lefty's Avatar
 
Join Date: Feb 2008
Location: Denver CO
Moto: 01 BMW F650GS Dakar
Posts: 15,677
Default

Quote:
Originally Posted by fun-times-always View Post
i didnt put any DIRECT pressure on the engine, the sprayer was a fair distance from the engine. the fan works, and it works well. Its louder now than i have ever noticed before, and it will not overheat at idle, i can let it idle for a long time, nothing, but at any speed at rpm greater than say, 3k it will start and i smell a burning smell. i hope this info helps a little bit too. thanks again
How long ago was this?
Mr Lefty is offline   Reply With Quote
Old 11-17-2008, 04:03 AM   #7
fun-times-always
Squid
 
Join Date: Nov 2008
Location: Sierra Vista, AZ
Moto: 2004 R1
Posts: 9
Default

this happend back in july, its been in the garage since then, but days are still great and i got the bug again (not far from phoenix, az) and thought it would be worth a try to fix. i see your in Osan too, i spent 2 years between Daegu and Incheon
fun-times-always is offline   Reply With Quote
Old 11-17-2008, 04:23 AM   #8
LOZ
clutch it up bitches!
 
LOZ's Avatar
 
Join Date: Nov 2008
Location: Santiago, RD
Moto: Honda CRF50
Posts: 548
Default

Quote:
Originally Posted by fun-times-always View Post
i smell a burning smell.
but what kind of burning smell? burnt rubber, burnt coolant, burnt oil? be more specific.

this is very good info. it means that there is a leak. you shouldnt be smelling anything else besides exhaust fumes... so if you smell burnt up coolant then there must be a crack on one of the hoses. sometimes the crack is so small that it wont leak unless the coolant inside is under a lot of pressure, in other words, really hot. and that is why it only overheats when you go passed 3Krpm.

also check the radiator itself, it could be cracked as well. I had a similar situation when I bought my truck. all the hoses were fine, but the radiator has a small crack at the bottom on the right side, that was almost impossible to spot....

you might want to take off your radiator and check it manually. then plug it and run water through it to see if you can spot it coming out anywhere...

spotting a leak on a bike shouldnt be too hard. just take off the plastics, have somebody hold the throttle over 3Krpm and wait till you start smelling the burn, then carefully look at all the hoses. use something to move the hoses around, so you dont burn yourself.

hope this helps.

-Loz
LOZ is offline   Reply With Quote
Old 11-17-2008, 04:31 AM   #9
Mr Lefty
TWFix Legend
 
Mr Lefty's Avatar
 
Join Date: Feb 2008
Location: Denver CO
Moto: 01 BMW F650GS Dakar
Posts: 15,677
Default

Quote:
Originally Posted by LOZ View Post
but what kind of burning smell? burnt rubber, burnt coolant, burnt oil? be more specific.

this is very good info. it means that there is a leak. you shouldnt be smelling anything else besides exhaust fumes... so if you smell burnt up coolant then there must be a crack on one of the hoses. sometimes the crack is so small that it wont leak unless the coolant inside is under a lot of pressure, in other words, really hot. and that is why it only overheats when you go passed 3Krpm.

also check the radiator itself, it could be cracked as well. I had a similar situation when I bought my truck. all the hoses were fine, but the radiator has a small crack at the bottom on the right side, that was almost impossible to spot....

you might want to take off your radiator and check it manually. then plug it and run water through it to see if you can spot it coming out anywhere...

spotting a leak on a bike shouldnt be too hard. just take off the plastics, have somebody hold the throttle over 3Krpm and wait till you start smelling the burn, then carefully look at all the hoses. use something to move the hoses around, so you dont burn yourself.

hope this helps.

-Loz
Mr Lefty is offline   Reply With Quote
Old 11-17-2008, 04:39 AM   #10
t-homo
WSB Champion
 
Join Date: Feb 2008
Location: Springfield, MO
Posts: 7,146
Default

Seems like you should have a pretty good chance at finding the culprit. A lot of good info and a lot of fuckin knowledge on here.
t-homo is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:27 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.