Go Back   Two Wheel Fix > General > Cage Hell

Reply
 
Thread Tools Display Modes
Old 08-08-2009, 04:42 PM   #1
Smittie61984
I give Squids a bad name
 
Smittie61984's Avatar
 
Join Date: Mar 2008
Location: Fly Over State
Moto: 1996 CBR600 F3 (AKA the Flying Turd)
Posts: 4,742
Default Taking a vehicle out of a field

I took one of my old vehicles out from behind my house today. It's a 1998 V6 2wd that has been sitting behind my house for almost 2 years since I hit a deer with it.

Well I got a new battery for it today and plan to do the basics like change the oil, brake fluid, check pads/rotors, coolant, etc.

Anything else I need to look out for besides spiders and snakes? Maybe throw some fuel treatment in if that stuff even works. Or something to help the old gas since it has a 1/4 tank in it and I want to burn that out before I add new gas.

So far it seems to be running very smoothly and I'm very happy. I want to run most of the gas out and then fill it up. The AC/Heat doesn't work at all (doesn't even blow), but it'll be a good vehicle for getting back and forth to work and school.
__________________
lifts - R.I.P.
Smittie61984 is offline   Reply With Quote
Old 08-08-2009, 05:31 PM   #2
Avatard
Crotch Rocket Curmudgeon
 
Avatard's Avatar
 
Join Date: Nov 2008
Location: Here to integrity
Moto: Li'l red baby Ninja
Posts: 7,482
Default

If it's rubber (hoses, belts, etc.) it probably needs replacement.
__________________
Insert free thought here.
Avatard is offline   Reply With Quote
Old 08-08-2009, 05:32 PM   #3
goof2
AMA Supersport
 
goof2's Avatar
 
Join Date: Feb 2009
Posts: 4,756
Default

Check belts and hoses. That stuff can dryrot in 2 years. Look over the electrical wiring as critters sometimes like to chew it. I would also take a look at the air filter. Make sure nothing has eaten through it or used the airbox for food storage. I'm not sure if I would but you might want to crank over the engine a bit before giving it spark to pump some oil around. There is not going to be any oil left in the motor, it will all be in the pan.
goof2 is offline   Reply With Quote
Old 08-08-2009, 05:38 PM   #4
Smittie61984
I give Squids a bad name
 
Smittie61984's Avatar
 
Join Date: Mar 2008
Location: Fly Over State
Moto: 1996 CBR600 F3 (AKA the Flying Turd)
Posts: 4,742
Default

I did a quick glance over the belts and hoses and so far they seem to be fine. I'll probably replace the serpentine belt regardless. The tires are in perfect shape too, no dry rot.

Forgot to check the Air Filter but it's a K&N so that should add about 110hp and fight off birds who want to nest.
__________________
lifts - R.I.P.
Smittie61984 is offline   Reply With Quote
Old 08-08-2009, 05:51 PM   #5
Smittie61984
I give Squids a bad name
 
Smittie61984's Avatar
 
Join Date: Mar 2008
Location: Fly Over State
Moto: 1996 CBR600 F3 (AKA the Flying Turd)
Posts: 4,742
Default

checked the hoses and all seems fine. Even the serpentine seems fine but I'm sure I'll replace it.

Only one hose seems questionable and it had some mud caked on it from god knows when. It goes from the heater core to the motor.

The air filter was in tip top shape and no need to replace. Just neeeds to be cleaned.

Now if I could figure out why the fan (for the AC/Heat) doesn't blow then I'd be one happy camper. But that was before I hit the deer.
__________________
lifts - R.I.P.
Smittie61984 is offline   Reply With Quote
Old 08-08-2009, 06:28 PM   #6
101lifts2
WSB Champion
 
101lifts2's Avatar
 
Join Date: Nov 2008
Location: Anaheim, CA
Moto: 2009 Kawi ZX6R
Posts: 5,570
Default

Remove the spark plugs and spray a little oil in the cylinder. I can guarantee that the cylinder walls are rusted as with the rings.
__________________
Train Hard

Ron Paul - 2012

Mark of Excellence
GM
101lifts2 is offline   Reply With Quote
Old 08-08-2009, 06:35 PM   #7
Avatard
Crotch Rocket Curmudgeon
 
Avatard's Avatar
 
Join Date: Nov 2008
Location: Here to integrity
Moto: Li'l red baby Ninja
Posts: 7,482
Default Hey guys...

RIF:

"So far it seems to be running very smoothly and I'm very happy."

If it's running, it's seen oil already.
__________________
Insert free thought here.
Avatard is offline   Reply With Quote
Old 08-08-2009, 07:01 PM   #8
was92v
Nowhere Man
 
Join Date: Nov 2008
Posts: 558
Default

Sea Foam... the only stuff I've ever used that really does work. Put some in the fuel tank when you gas it up.
was92v is offline   Reply With Quote
Old 08-10-2009, 11:32 AM   #9
unknownroad
Guys... where *are* we?
 
unknownroad's Avatar
 
Join Date: Nov 2008
Location: South Carolina
Moto: SV650 Interstate, CX500 rat-bobber, whatever else runs.
Posts: 784
Default

I'd add some 90% rubbing alcohol to the tank to help with any water that may have gotten into the tank via condensation, and fill it the rest of the way. If you're not going to dump the old fuel, I'd rather dilute it with good fuel than burn it straight.

When you were checking the rubber, did you check the windshield wipers? Sucks to be caught in a storm and have the rubber come off the blade when you hit 'em.

Check the fuse on the fan? Do the lights all work? Check tire pressure ASAP if you haven't already. Change the oil as well. Check the brake fluid- if it's real dark, replace it.
__________________
Considering Verizon Business service? Perhaps you'd like to consider a nice drain cleaner enema instead?
unknownroad is offline   Reply With Quote
Old 08-11-2009, 02:39 AM   #10
101lifts2
WSB Champion
 
101lifts2's Avatar
 
Join Date: Nov 2008
Location: Anaheim, CA
Moto: 2009 Kawi ZX6R
Posts: 5,570
Default

Quote:
Originally Posted by Avatard View Post
RIF:

"So far it seems to be running very smoothly and I'm very happy."

If it's running, it's seen oil already.
LOL...didn't see that part. I would have changed the oil first since it prolly has alot of water condensation in it.
__________________
Train Hard

Ron Paul - 2012

Mark of Excellence
GM
101lifts2 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:38 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.